- CEREC Zirconia Blocks With 1 Pin
Zirconia Blocks
# 101989
Feature
HS SIRONA - CEREC INLAB Zirconia Blocks with 1 pin for MC XL
FDA CERTIFIED
We offer HS ( High Strength ) Sirona InLab compatible blocks which are designed for use in all InLab milling units and MCXL . Blocks come in packages of 3 to 10 per box, depending on size, and they all come with solid metal mandrel .
Product Information:
* First grade Zirconia powder
* Sinterization temperature 1530 Celsius 2 hours
* Shrinkage adjusted for 20%
Color:
Our Zirconia blocks, are Standard LL0.5 .
For darker shades liquid Coloring is available in the following: *LL1 *LL2 *LL3 *LL4 *LL5 as the darkest shade.
Coloring for Full contour is also available in 16 Vita shades: *A1 *A2 *A3 *A4 ... *D4
Special stains for cervical, gum, and occlusal are available in Pink, Grey and Ochre.
Physical Quality:
Bending Strength: 1200 Mpa
Vickers Hardness: 12.8 Gpa
Firing Instruction Firing time:
Firing chart:
RT to 1530- 1600 degrees Celsius at 4-5 Celsius per minute, according to the job size.
Some technicians prefer a lower temperature, others a higher one, which will give more translucency to the piece. Cool off at 5 Celsius per minute, until 200 Celsius , not before.
Then open door
Dont forget to decontaminate your sinter oven once a week, or at least once a month. This advice is for every sinter oven in the market, regardless of brand name, or origin.
Size: 55 x 19 x 15.5 mm
Package: Priced Per Block - Sold in Box of 5
Made in China.
